Front loader at MTZ - KUNA

1. Load capacity: 900 kg.
2. Ovoid boom - an elongated ellipse, the entire boom is a double-sided ovoid. The ovoid boom is lighter than a box boom and provides significant advantages in lifting capacity.
Revolutionary ovoid boom section (increases strength by 15% without increasing metal thickness)
3.Updated design, fastening large rods at the level of the tractor hood, which allows you to get a modern loader design.
4. Structural weight no more than 500 kg (without working parts)
5..Maximum lifting height 4.33 m, unloading height (bucket in horizontal position) 3.2 m.
6.The angle of unloading with a bucket is at least 60 degrees.
7. All elements of the boom and struts are made of structural steel 5 mm thick, the spars of the struts are made of steel 8; 10 mm.
8. Installed on the tractor frame without cushions, directly on the tractor side members
9. The number of attachment points for the loader to the tractor frame is 14 bolts.
10. Additional stiffening ribs “reinforcement wedges” are installed at the ends of the loader boom
11. The rack is fastened to the rack spar through an additional flange on the spar and the box-section reinforcement is installed.
12.The level of the bucket remains strictly parallel to the ground along the entire lifting height, which prevents the load from spilling out
13. Unloading device on the rear axle - channel.
14.Included in the package are unloading beams and radiator protection frame
15.Attaching the hydraulic line to the lower cross member using additional nuts on the line fittings.
16.Presence of a bracket for mounting the receiver cylinder